AP58 Programmable Rotary Encoder
AP58 Programmable Rotary Encoder Drawing

Ø58mm incremental encoder

AP58

The AP58 series is a set of programmable photoelectric rotary encoders that consists of AP58M, AP58B, AP58C, AP58C2, AP58C3, AP58D depending on required mounting parameters. Through the programming tool that constitutes of a USB cable and Windows compatible software, the user can set a desired pulse number per revolution from 1 to 65.536. Software is supplied free of charge and can be found on the official website of Precizika Metrology. It can be installed on any PC running a Windows operating system (Windows XP or later).

Mechanical data

Number of output pulses per revolution 1 – 65536
Maximum shaft speed 12000 rpm
Maximum shaft load axial: 10 N
radial: 20 N
Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
Starting torque at 20°C ≤ 0.01 Nm
Rotor moment of inertia < 15 gcm²
Protection (IEC 529) IP64
Maximum weight without cable 0.25 kg
Operating temperature -10…+70°C
Storage temperature -30…+80°C
Maximum humidity (non-condensing) 98%
Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
Permissible shock (11 ms) ≤ 1000 m/s²

Electrical data

Version AP58-F Π TTL; Π HTL
Supply voltage + 5 V ± 5 %; + (10 to 30) V
Max. supply current (without load) 120 mA
Light source LED
Incremental signals Differential square-wave U1 / U1 and U2 / U2. Signal levels at 20 mA load current:
– low (logic “0”) ≤ 0.5 V at Up =± 5V
– low (logic “0”) ≤ 1.5 V at Up = 10 to 30 V
– high (logic “1”) ≥ 2.4 V at Up =±5V
– high (logic “1”) ≥ (Up – 2)V at Up = 10 to 30 V
Reference signal One differential square-wave U0 / U0 per revolution.
Maximum operating frequency < 2 MHz
Direction of signals U2 lags with U1 in clockwise rotation (viewed from shaft side)
Maximum rise and fall time < 0.5 μs
Standard cable length 1 m; without connector
Maximum cable length 25 m

Accessories

Downloads

Product Catalog
Encoder Selection Guide
AP58 Programmable Rotary Encoder Datasheet
AP58 Programmable Rotary Encoder 2D Drawing
AP58 Programmable Rotary Encoder 3D Drawing
AP58 Software

Order code

AP58X1 – X2 – X3 – X4/X5

Modification (X1) Shaft Hole Diameter (X2) Supply Voltage (X3) Cable Length (X4) Connector Type (X5)
M – AP58M
B – AP58B
C – AP58C
C2 – AP58C2
C3 – AP58C3
D – AP58D
HE1 – AP58HE1		 6, 8, 10, 12, 14 15 – diameter mm*
*only for AP58HE1 modification		 05V – +5V
30V – +(10 to 30)V*
*only for AP58 with HTL output signals		 AR01 – 1m
AR02 – 2m
AR03 – 3m		 W – without connector
B12 – round, 12 pins
C12 – round, 12 pins
D9 – flat, 9 pins
D15 – flat, 15 pins
RS10 – round, 10 pins
ONC – round, 10 pins

ORDER EXAMPLES: 

  1. AP58M-05V-AR01/B12
  2. AP58HE1-6-30V-AR03/W

Order form

    Check the "Order code" tab in the product page to see how to know your order code.