Ø25mm absolute encoder
This is a high-resolution, singleturn absolute encoder with a 20 Bit BISS-C interface. The encoder consists of several optical reflectance sensors arranged at an angle of 180 degrees to each other. This allows to eliminate mechanical errors in the application, such as
the runout of the measured shaft, by using subsequent electronics.
| Maximum shaft speed | 20 000 rpm |
| Protection (IEC 529) | IP00 |
| Maximum weight without cable | 0.01 kg |
| Operating temperature | -40…+70°C |
| Storage temperature | -40…+100°C |
| Maximum humidity (non-condensing) | 98% |
| Permissible vibration (55 to 2000 Hz) | ≤ 100 m/s² |
| Permissible shock (11 ms) | ≤ 400 m/s² |
| SSI | BISS-C | TTL | |
| Accuracy | ± 100″ | ± 100″ | ± 100″ |
| Output code | Gray/Binary | Binary | RS422 |
| Resolution (positions per turn) | up to 20 bits (1048576 positions) | up to 20 bits (1048576 positions) | any from 1 to 220 (1048576) PPR |
| Maximum electrical speed | 14 000 RPM | 14 000 RPM | 80 RPM (at 220) |
| Clock frequency | 10 MHz | 20 MHz | – |
| Calculation time | < 2 us | < 2 us | – |
| Maximum frequency | – | – | 6 MHz |
| Supply voltage | 5V ± 5% | 5V ± 5% | 5V ± 5% |
| Supply current | 80 – 220 mA | 80 – 220 mA | 80 – 220 mA |
| AR25M-X1 – X2 – X3 – X4 – X5 | |||||
| Output signals interface (serial) (X1): | Output code (X2): | Bit number* (X3): | Cable length (X4): | Connector Type (X5): | |
| S – SSI B – BiSS C F – TTL |
B – Binary G – Gray (only for SSI interface) 0 – TTL output signal interface |
B1 – 1 …-… B20 – 20 *for absolute version |
1 …-… 1 048 576 *for incremental version |
T100 – 0.1 m …-… T1000 – 1 m (standard) …-… T4500 – 4.5 m (maximum) |
W – without connector B12 – round, 12 pins C12 – round, 12 pins D9 – flat, 9 pins D15 – flat, 15 pins RS10 – round, 10 pins ONC – round, 10 pins |
Marketing & Partnerships
Client Support
Business Development Manager
